Files
llmiotsafe/annotation/标注说明.txt
2026-05-12 17:01:39 +08:00

40 lines
1.6 KiB
Plaintext
Raw Permalink Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
SafeHome Benchmark 人工标注说明
================================
一、你的任务
阅读 annotation_tasks/ 目录下的每个 txt 文件,根据智能家居设备日志判断是否存在安全异常。
二、标注方式
打开 annotation_sheet.csv逐行填写以下字段
1. is_anomaly: 填 yes 或 no
- yes = 日志中存在安全异常/威胁
- no = 一切正常,无异常
2. threat_type: 如果 is_anomaly=yes填写具体类型从以下选择
intrusion / tailgating / credential_theft / fire_risk / unattended_cooking /
carbon_monoxide / sensor_stuck / sensor_drift / sensor_malfunction /
actuator_stuck / lock_malfunction / safety_device_failure / water_leak /
possible_fall / abnormal_inactivity / health_concern / child_safety /
behavioral_anomaly / none
如果 is_anomaly=no填 none
3. confidence: 填 high / medium / low
- high = 非常确定
- medium = 比较确定但有一点犹豫
- low = 不太确定,猜的
4. brief_reason: 一句话解释你的判断理由
三、注意事项
- 每个 task 独立判断,不要参考其他 task 的结果
- Matter 协议温度单位是 0.01°C比如 2350 = 23.50°C
- 正常做饭时厨房温度上升 3-5°C 是正常的
- 一天内温度波动 ±2°C 是正常的日间变化
- Occupancy 传感器有人时每5分钟心跳一次、无人时每30分钟心跳一次这是正常的
- 不要过度解读正常的日常活动
四、参考时间
预计每个 task 需要 3-5 分钟100 个 task 约 5-8 小时。
建议分 2-3 次完成,避免疲劳影响判断质量。